DATASHEET
M2D™-SUB : Compact Subwoofer
21.86
[555 mm]
24.00
[610 mm]
11.25
[286 mm]
37.00
[940 mm]
39.00
[991 mm]
17.50
[445 mm]
8.50
[216 mm]
19.50
[495 mm]
Dimensions 39.00" w x 24.00" h x 17.50" d
(991 mm x 610 mm x 445 mm)
Weight 173 lbs (78.47 kg); shipping: 197 (89.36 kg)
Enclosure Multi-ply hardwood
Finish Black textured
Protective Grille Powder-coated hex stamped steel
®
Rigging Patented QuickFly MRF-2D-Sub rigging frame
with integral CamLinks™, rear connecting bars and
captive quick-release pins
The M2D-Sub compact subwoofer has an
operating frequency range of 28 Hz to
160 Hz with a maximum peak SPL of 138
dB. It is primarily intended as a compan-
ion sub-bass unit for integration into an
M2D compact curvilinear array system
for small-to-medium sized applications.
However, it is perfectly suited to general
use where powerful low frequency aug-
mentation is desired. In combination with
M2Ds, M2D-Sub extends the overall system
power bandwidth and frequency response
to 30 Hz. External dimensions are equiva-
lent to two M2D cabinets. QuickFly rigging
allows the M2D-Sub to be flown or ground-
stacked in multiples or in combination with
M2Ds.
note 5 on back page) and is capable of a
half-inch of linear excursion. TruPower®
The trapezoidal, vented M2D-Sub enclosure
is constructed of multi-ply hardwood and
coated with a textured black finish. Integral
metal grilles protect the drivers. A weather-
protected version is available with custom
rain hood to protect the electronics.
limiting technology aids driver protection,
minimizes power compression, protects
drivers from over-excursion under high
peak power conditions and permits high
constant output. The M2D-Sub is self-pow-
ered and includes an integral two-channel
class AB/H complementary MOSFET power
amplifier with 2250 watts total burst capa-
bility. The M2D-Sub’s Intelligent AC™ power
supply affords automatic voltage selec-
tion, EMI filtering, soft current turn-on and
surge suppression. Phase-corrected active
processing circuits help maintain excellent
performance and reliability, and the high
common-mode rejection of the laser-
trimmed differential input permits long sig-
nal runs through a simple shielded twisted
pair cable. The amplifier, control electron-
ics and power supply are integrated into a
field-replaceable module.
The optional QuickFly MG-2D multipurpose
grid allows either flying or ground stacking
various combinations of M2D and M2D-Sub.
Up to 16 M2Ds (or the equivalent weight of
M2D and M2D-Sub) may be flown with a 7:1
safety factor. Up to eight M2Ds, four M2D-
Subs or six M2Ds and one M2D-Sub may be
safely ground stacked.
Meyer Sound’s RMS™ remote monitoring
system is fitted as standard and provides
comprehensive monitoring of system
performance parameters over a Microsoft
Windows® network.
The M2D-Sub is fitted with two 15-inch, 4-
inch voice coil cone drivers incorporating
lightweight neodymium magnet structures.
Each driver is rated at 1200 AES watts (see
QuickFly rigging system simplifies
integration in flown or ground-stacked
arrays
Extremely high power-to-size ratio for
flexible installation
Concert halls, night clubs and houses of
worship
Exceptional fidelity and peak capability
assure clean, high-impact lows
Theatrical sound reinforcement
Seamless integration with other
M Series models
Portable and installed audio-visual
systems
|
LG Electronics Computer Monitor W2053TQ User Manual
LG Electronics DVD Player DVT699H User Manual
Link electronic Stereo Amplifier LEI 532 User Manual
Link electronic Switch 816 OP A User Manual
LOREX Technology Security Camera SG6993P User Manual
Magnavox TV VCR Combo CC13B1MG User Manual
Makita Sander BO4550 User Manual
Maytag Refrigerator W10321480A User Manual
Meridian America Stereo Amplifier C61R User Manual
Microsoft Video Game Controller 032502 User Manual