MGA Entertainment Digital Camera LR06 User Manual

FCC Compliance  
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,  
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer-  
ence by one or more of the following measures:  
Ages 6+  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
355267  
ADULT SUPERVISION REQUIRED  
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)  
This device may not cause harmful interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
INTRODUCTION  
Become a movie-maker with your very own Bratz™ Movie Stars Studio! Pose your Bratz™ Movie Stars  
Sharidan™ doll (the most pose-able Bratz™ ever!) and snap a picture with the real digital camera! Re-pose  
her and snap another picture! When you are done you can play back the pictures on your TV as a movie that  
you can watch! You can also print out photos on a computer for your fans!  
Warning: Changes or modifications to this unit not expressly approved by the party responsible for  
compliance could void the user‛s authority to operate the equipment.  
CONTENTS  
• 1 Bratz™ Movie Stars Sharidan™ Doll with Outfit  
• 1 Bratz™ Movie Stars Camera  
• 1 Adjustable Camera Tripod  
• 1 Star Base  
‘Let‛s care for the environment!‛  
• 1 TV Video Cable (RCA)  
• 1 USB Cable  
The wheelie bin symbol indicates that the product must not be disposed of with other  
household waste. Please use designated collection points or recycling facilities when disposing  
of the item  
• 1 Hair Brush  
BEFORE YOU BEGIN  
Before you say “Action”, have an adult help you install batteries:  
1.Remove the “Shutter Release” button from it‛s holder on the  
side of the camera.  
2.Using a Phillips screwdriver (not included) remove the screw and  
battery compartment cover from the side of the camera.  
3.Install three (3) AA alkaline batteries (not included) making  
sure the (+) and (-) ends face the proper direction as indicated  
Specifications for Camera:  
O/S Requirement:  
For Computer - Microsoft Windows® 98 SE / ME / 2000 / XP  
For Mac® - Up to OS 10.2.8  
White Balance:  
Exposure Control:  
Image Size:  
Display:  
Automatic  
Automatic  
640 x 480 pixels  
Display with TV or computer (TV and Computer are not included)  
USB 1.1 for Computer  
Interface:  
Storage:  
inside the battery compartment.  
3 x AA Batteries  
4MB Built-in memory (including 2 MB for Photo taking, 2 MB for Firmware)  
JPG File  
ANIMATE  
1.5V AA/LR06  
4.Replace the compartment cover and tighten the screw.  
OFF  
Photo Type:  
Memory:  
1.5V AA/LR06  
SD Card Slot (Support up to 1GB SD card - Not Included)  
1.5V AA/LR06  
NOTE: No LCD screen for Camera.  
QUICK START  
1. Place the camera on top of the tripod so that the bolt goes into the camera‛s tripod mount. (See Fig. 1).  
Assembly:  
NOTE: Windows® is a trademark of Microsoft Corp., registered in the U.S. and other countries.  
NOTE: Mac® and Macintosh® is a trademark of Apple Inc., registered in the U.S. and other  
countries.  
Please keep this manual as it contains important information.  
TM & © MGA Entertainment, Inc.  
BRATZ™, BRATZ PETZ™, LIL‛ BRATZ™,  
BRATZ BABYZ™, BRATZ KIDZ™ and all  
related logos, names, characters, distinctive  
likenesses and slogans, as well as the  
packaging and images appearing thereon, are  
the exclusive property of MGA.  
Turn the bolt to right  
to secure the mounting.  
16300 Roscoe Blvd.  
0507-0  
Van Nuys, CA 91406 USA  
(800) 222-4685  
Printed in China  
Fig. 1  
 
8
1
Movie Playback:  
Now we will watch the movie that you have just created:  
TV Connection and Camera Start:  
1. With the camera still on, change the “ANIMATE”/CAPTURE” Switch to “ANIMATE”.  
2. The TV screen icons will disappear and a new Frame Counter will appear in the lower left hand corner. This  
counter shows the number of total captured images and the current frame that is displayed on screen.  
3. Watch the TV screen as the first frame of your animation comes up. If it is not at the first frame. Use  
the Previous Image Button “ ” and Next Image Button “ ” (Please refer to Fig. 3) to scroll to the correct  
image.  
For best results, you should attach the Camera to a TV with the TV Video Cable (included). This will allow  
you to see what the camera sees!  
1. Attach the black plug of the TV cable to the Video Out Jack of the Camera. (Fig. 5)  
2. Attach the opposite end of the TV cable to the yellow RCA video in Jack on the front or back of your  
TV, (the Jack is usually yellow, like the plug of the TV cable) (Fig. 5).  
4. Press the “PLAY” button to see your Bratz™ doll raise her arm and wave at you!  
5. Press the “PLAY” button continuously to watch the movie over and over.  
TV  
Deleting Images:  
If you ever “mess up” while re-posing your Bratz™ doll, or you capture an image that you don‛t like, you can  
easily delete the image. To do so:  
L
R
AUDIO  
VIDEO IN  
1. With the camera in “ANIMATE” mode, use the Previous Image Button “ ” and Next Image Button ” “ to  
scroll to the first image you want to delete.  
2. Press the “DELETE” Button once. Scroll to the or icon on TV screen and press the “Shutter Release”  
button.  
3. Repeat Step 2 for any other frames you want to delete.  
4. Scroll back to the first frame of your movie and press the “PLAY” Button to watch it without the unwanted  
image(s).  
5. If you want to delete all of the frames, press the “DELETE” Button twice and confirm deletion with the  
“Shutter Release” button.  
SAVING IMAGES  
Fig. 5  
If you want to save your images to a computer for printing, emailing to friends or other purposes, have an  
adult help you with these steps:  
1. Press the “START/WAKE UP” Button on the Camera and hold for about 2 seconds to put it in sleep mode.  
2. Disconnect the Camera from the TV Cable.  
3. Power ON the TV and set the channel to Video Input.  
3. Attach the USB Cable to the back of the camera. (See Fig. 8).  
4. Attach the other end of the USB Cable to the USB port of a PC that is running Windows®  
98 SE/ME/2000/XP, or a Macintosh® computer that is running up to OS 10.2.8.  
NOTE: The correct Video Input channel name may vary from TV to TV. Some examples are: Aux 1 or 2,  
Input 1 or 2, Line 1 or 2. Consult your television manual for the appropriate channel to use.  
4. Set the “ANIMATE/CAPTURE” Switch on the side of the  
camera to “CAPTURE”.  
PC  
5. Set the “ON/OFF” switch to “ON”.  
6. Press & hold the “START/WAKE UP” button for about 2  
seconds; you should hear an audible “chirp”.  
7. The Camera Frame (everything that the camera sees through  
the lens) will appear on the TV screen.  
8. The TV screen also shows the following Icons:  
a. “Capture” Mode Icon – This indicates that the camera is set to  
Capture Image mode.  
b. Battery Power – This icon shows the power level of the  
batteries. When they are almost exhausted the icon will turn  
e a  
red.  
a.  
c. SD Card Detected – This icon shows that there is an SD Memory  
Card in the camera slot.  
b.  
Fig. 8  
d. Frames Available – This number shows the number of empty  
frames available. Internal camera memory will give you around  
40 frames. Adding a 256MB SD Card (not included) will give you  
around 5,000 frames.  
5. Navigate to the folder on the External Storage device and copy all of the .jpg files to a folder on your PC  
or Mac®.  
c.  
6. Once you have the image files on your computer, you can:  
d.  
• Print out copies and share them with your friends.  
XXXX  
NOTE: Camera supports SD cards up to 1GB in size.  
• Email copies of the images to friends and family.  
• Use a video editing or “flipbook” program to make a video sequence.  
o NOTE: Use a program that is able to import files as “JPEG Sequences”.  
Fig. 6  
9. If the Camera Frame is blurry or not clear, adjust the Focus  
Knob underneath the camera lens until your subject is clear.  
10. The camera is now ready to record your brilliant masterpiece!  
Animation Notes:  
1. Your Camera plays movies back around 3 to 4 frames per second. This means that around 3 to 4 images  
make up one second of movie time. Think about the kinds of actions you want your Bratz™ doll to do and  
act them out yourself. Time them and see how many seconds each action takes. This will give you an idea  
of the number of images to capture.  
NOTE: Make sure that you have sufficient light to see your subject clearly. If it appears too dark on the  
TV screen, add more light until the subject is clear.  
2. The more images you capture for an action, the slower the action will look on screen. Take a look at the  
images below:  
NOTE: The camera is able to capture images without a TV, but you will not be able to see what the camera  
sees as whole captured images cannot be seen through “Viewfinder”. This makes animation much  
more difficult!  
 
6
3
6. Now, move your doll‛s arm to the left and straighten it out as you go. Then, bring her arm back up into  
Capturing Images:  
the first position. Do this six times as shown below.  
Your Camera is designed to take a series of still pictures and play them back rapidly in succession, this  
process is known as animation. With animation you will be able to make your Bratz™ doll appear to come to  
life! Here‛s how:  
1. Pose your Bratz™ doll in a starting pose.  
3.  
1.  
2.  
2. Remove the “Shutter Release” Button from its holder.  
3. Press down on the “Shutter Release” Button to take a picture. The Camera will “chirp” to indicate that a  
picture was taken. (Note: You can hold the “Shutter Release” Button to take a series of pictures.)  
4. Move your doll‛s arm up slightly and take another picture.  
5.  
4.  
6.  
7. Repeat Step 6 three more times.  
8. Now, move your doll‛s arm back the opposite direction. Do this seven times until the arm is in the same  
place as the beginning of Step 1.  
5. Repeat Steps 3 and 4 as you take more pictures of your doll. Raise her arm up a little bit each time. Do  
this six times.  
2.  
3.  
1.  
2.  
3.  
1.  
5.  
4.  
7.  
6.  
NOTE: You can remove the camera from the tripod and use the plastic viewfinder to take pictures of your  
friends, pets, etc. Before you do this, adjust the Focus Ring left and right until the subject is clear on the  
TV screen.  
Important Note: DO NOT turn off your camera with the “ON/OFF”  
Toggle Switch; otherwise your images will be lost. If you need to turn the camera off for awhile, press the  
“Start/Wake up” button.  
5.  
4.  
6.  
 
4
5

La Crosse Technology Clock WS 8157 User Manual
LG Electronics Furnace 395CAV User Manual
Linksys Network Card PLUSB10 User Manual
Makita Brush Cutter EM4350LH User Manual
Makita Heat Gun HG 5010 HG 5011 HG 6010 HG 6020 HG 6300 User Manual
Makita Portable Generator G12010R User Manual
Maytag Microwave Oven MMV5208WS User Manual
McCulloch Chainsaw ELP 3000 User Manual
Metabo Saw PKU 250 User Manual
Metra Electronics Automobile Accessories 99 5819 User Manual