MGA Entertainment DVD Player SMB 657 User Manual

INSTRUCTION MANUAL  
SMB-657  
Please read before using this unit.  
dvd / cd player  
 
WARNING  
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.  
The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such  
as vases, shall be placed on the apparatus.  
The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers,  
table-cloths, curtains, etc.  
No naked flame sources, such as lighted candles, should be placed on the apparatus.  
The main plug is used as the disconnected device, the disconnet device shall remain readily operate.  
CAUTION  
-
To prevent electric shock, do not use this (polarized) plug with any extension cord, receptable or  
other outlet unless the plug can be fully inserted without exposing any parts of this blades.  
To prevent electric shock, match wide blade of plug to wide slot, fully insert.  
-
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
WARNING: TO REDUCE THE  
RISK OF ELECTRIC SHOCK,  
DO NOT REMOVE COVER  
(OR BACK). NO USER-  
SERVICEABLE PARTS  
INSIDE, REFER SERVICING  
TO QUALIFIED SERVICE  
PERSONNEL.  
The exclamation point within  
an equilateral triangle is in-  
tended to alert the user to  
presence of important operat-  
i n g a n d m a i n t e n a n c e  
(servicing) instructions in the  
literature accompanying the  
appliance.  
The lighting flash with arrowhead  
symbol, within an equilateral trian-  
gle, is intended to alert the user to  
the presence of uninsulated "dan-  
gerous voltage" within the  
product's enclosure that may be of  
sufficient magnitude to constitute  
a risk of electric shock to persons.  
IMPORTANT  
Since CD circuitry may cause interference with other radio tuners nearby, switch this recorder  
off when not in use or move it away from an affected radio tuner.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  
conditions: (1) This device may cause harmful interference, and (2) this device must accept any  
interference received, including interference that may cause undesirable operation.  
Warning: Changes or modifications to this unit not expressly approved by the party responsible  
for compliance could void the user's authority to operate the equipment.  
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment generates  
uses and can radiate radio frequency energy and, if not installed and used in accordance with  
these instructions, may cause harmful interference to radio communications. There is no  
guarantee that interference will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which can be determined by turning  
the equipment off and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that  
to which the receiver is connected.  
Consult the dealer or an experienced radio / TV technician for help.  
This ClassB digital apparatus complies with Canadian ICES-003.  
SAFETY CERTIFICATION  
This digital apparatus is made and tested to meet safety standards of the FCC, requirements  
and compliance with safety performance of the U.S. Department of Health and Human Services,  
and also with FDA Radiation Performance Standards 21 CFR Subchapter J.  
1
 
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all Instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
7. Do not block any of the ventilation openings.  
Install in accordance with manufacturer's instructions.  
8. Do not install near any heat source such as radiators, heat registers, stoves,  
or other apparatus (including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades with  
one wider than the other. A grounding type plug has two  
blades and a third grounding prong. The wide blade or the  
third prong are provided for your safety. If the provided plug does not fit into  
your outlet, consult an electrician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched, particularly at  
plugs, convenience receptacles, and the point where they exit from the  
apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12.  
Use only with a cart, stand, tripod, bracket, or table specified by  
the manufacturer, or sold with the apparatus. When a cart is used,  
use caution when moving the cart/apparatus combination to avoid  
injury from tip-over.  
13. Unplug this apparatus during lightning storms or when unused for long  
periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required  
when the apparatus has been damaged in any way, such as if the power-  
supply cord or plug is damaged, liquid has been spilled or objects have fallen  
into the apparatus, or when the apparatus has been exposed to rain or  
moisture, does not operate normally, or has been dropped.  
Class II equipment symbol  
This symbol indicates that the unit has a double insulation system.  
2
 
Getting Started  
Before attempting to connect, operate or adjust this product, please read these instruc-  
tions completely and keep this manual for future reference.  
Dear customers :  
May we take this opportunity to thank you for purchasing this DVD Player.  
We strongly recommend that you carefully study the operating instructions before operat-  
ing the unit.  
Main Features  
Front loading DVD / CD player.  
Built-in Dolby Digital.  
Standards  
Video : NTSC  
Audio : PCM (48 or 96 kHz), 2 Channel MPEG layer 2, Dolby AC-3 line out  
Features of audio specifications  
DOLBY Digital 2 ch decoding output.  
DOLBY for Digital (Coaxial) output.  
Linear PCM output.  
Consumers should note that not all high definition television sets are fully com-  
patible with this product and may cause artifacts to be displayed in the picture.  
In case of 525 or 625 progressive scan picture problems, it is recommended that  
the user switch the connection to the “STANDARD DEFINITION” output. If there  
are questions regarding our TV set compatibility with this model 525p and 625p  
DVD player, please contact our customer service center.  
This product incorporates copyright protection technology that is protected by  
method claims of certain U.S. patents and other intellectual property rights  
owners. Use of this copyright protection technology must be authorized by  
Macrovision Corporation, and is intended for home and other limited viewing  
uses only unless otherwise authorized by Macrovision Corporation. Reverse  
engineering or disassembly is prohibited.  
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and  
the double-D symbol are trademarks of Dolby Laboratories. Confidential unpub-  
lished works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.  
3
 
Getting Started  
Disc types  
Disc size 12cm  
single side, single layer / single side, double layer  
NTSC DVD disc  
Audio &  
Video  
Playback time 135min / 240min max.  
Disc size 12cm / 8cm  
CD disc  
Audio  
Playback time 74min / 20min max.  
* Player is CD-R, CD-RW compatible.  
Note: CD-R, CD-RW Discs recorded with writing device can only be used when they are  
correctly treated.  
Region Management Information  
This DVD Player is designed and manufactured to respond to the Region Management  
Information that is recorded on a DVD disc. If the Region number described on the DVD  
disc does not correspond to the Region number of this DVD Player, this DVD player can-  
not play that disc.  
The Region number of this DVD player is  
.
Disc manintenace  
Before playback, wipe the disc from the center hole toward the outer edge with a clean  
cloth.  
Never use benzine, thinner, cleaning fluid, static electricity prevention liquids or any  
other solvent.  
Note : Dirty disc may cause bad picture.  
Correct  
Incorrect  
From the center to the edge  
4
 
Safety precautions  
Warning  
Attention  
To avoid electrical shock, do not open the  
cabinet, refer servicing to qualified person-  
nel only.  
If smoke, malodour or unrelated noise are  
emitted from the unit, turn off the power and  
disconnect the AC power cord.  
Warning  
Attention  
Keep the unit away from flower vases, tubs,  
sinks, etc. If liquids are spilt into the unit,  
serious damage could occur.  
Touching the unit is dangerous especially if  
during thunder.  
Warning  
Attention  
Do not expose this equipment to rain or  
moisture.  
When left unused for a long period of time,  
the unit should be unplugged from the house-  
hold AC outlet.  
Warning  
Attention  
Be sure to turn the unit off and disconnect the AC  
power cord before cleaning the unit surface. If the  
surface is dirty, wipe clean with a cloth which has  
been dipped in a weak soap and water solution and  
wrung out thoroughly, and then wipe again with a  
dry cloth.  
Do not block ventilation holes of the unit so  
that air can circulate freely,  
Note: This unit is a class 1 laser product and uses a visible laser beam which could  
cause hazardous radiation exposure if directed. Be sure to operate it correctly as  
instructed.  
5
 
Location of Control  
Top Panel  
Rear Panel  
8
9
10 11 12 13  
Front Panel  
1
2
3
4
5
6
7
Rear Panel  
Top Panel  
8. AC Power Cord  
9. Y, Cb/Pb, Cr/Pr output  
10. S-Video output  
11. Video output (composite)  
12. Digital Audio output (coaxial)  
13. Analog Audio output  
1. Disc Compartment Door  
2. Open/Close Button  
3. Standby/On Button  
4. Play/Pause Button  
5. Stop Button  
Front Panel  
6. Remote Sensor  
7. LED Indicator  
Green - Play mode  
Red - Standby mode  
6
 
Battery installation (remote control unit)  
1. Remove the battery cover.  
2. Insert two ‘AAA’ batteries (not included) making sure the polarity (+/-) matches the marks  
inside the unit.  
3. Replace the cover.  
Do not attempt to recharge, short-circuit, disassemble, heat or throw the batteries into  
the fire.  
Do not mix old and new batteries.  
Dispose of properly in accordance with local law.  
Do not mix different type of batteries. Do not mix alkaline, standard (carbon-zinc), or  
rechargeable (nickel-cadmium) batteries.  
Note : Weak batteries can leak and severely damage the remote control unit.  
Remote Control Unit  
1. Zoom Button  
2. Standby Button  
3. Numeric Buttons  
4. Subtitle Button  
5. Display Button  
6. Audio Button  
7. Angle Button  
8. Setup Button  
9. Play / Enter Button  
10. Direction Buttons  
( Up / Down / Left / Right  
11. P. Scan Button  
12. Volume – Button  
13. Volume + Button  
14. Title Button  
)
15. Mute Button  
16. Slow Button  
17. Search Button  
18. Program Button  
19. Repeat A-B Button  
20. Repeat Button  
21. DVD Menu Button  
22. Stop Button  
23. Pause/Step Button  
24. Fast Backward Button  
25. Fast Forward Button  
26. Next Button  
27. Previous Button  
* Press STANDBY/ON button when DVD player is on, the DVD player will switch to standby  
mode, LED will turn to red.  
7
 
Connect To TV  
Caution : Turn off all the equipment before any installation.  
This unit provides several types of video and audio signals output. They are :  
Y, Cb/Pb, Cr/Pr output  
RCA output  
S-Video output  
User can choose a suitable connection type to connect the player to TV.  
1. Y, Cb/Pb, Cr/Pr output  
Component Video  
(Y, Cb/Pb, Cr/Pr)  
2. Connection via Composite (RCA) Cable  
In this type of connection, we have to connect the Left/Right Audio Cables (Red and  
White) and a Video signal (Yellow).  
Audio in L  
Audio in R  
Video in  
3. Connection via S-Video Cable  
Audio in L  
Audio in R  
S-Video In  
8
 
Connection to Amplifier  
There are two different types of connection between the DVD player and an amplifier.  
1
2
3
Video Output  
Digital output via Coaxial Cable (Connection 1).  
2 channels (left/right) Audio Output (connection 2-3)  
Note:  
1. The Digital output cut off, when Analog output was selected.  
2. The Analog output cut off, when Digital output was selected.  
9
 
Operation  
TV Selection  
Turn on the TV, the DVD player and the Audio Amplifier System (if any).  
1. Press the “TV/VIDEO” button on the TV.  
2. Select the Video Mode (TV).  
Note: If there are more than 1 AV channel for the TV, select the channel you have  
connected to the DVD player.  
3. Select the Correct Audio Input on the AV Amplifier (if any).  
1. LANGUAGE SETUP MENU  
In stop mode press SETUP button and highlight  
languages setup then press ENTER button to  
confirm.  
OSD  
Press direction  
/
button to highlight the OSD and  
press ENTER button, then press the direction  
button to select the desired OSD language.  
/
• English  
• French  
• German  
• Italian  
• Spanish  
• Portuguese  
MENU  
Press direction  
then press the direction  
• English  
• French  
• German  
/
button to highlight the MENU and press the ENTER button,  
button to select the desired MENU language.  
• Italian  
• Spanish  
• Portuguese  
/
AUDIO  
Press direction  
/
button to highlight the AUDIO and press the ENTER button,  
then press the direction  
/
button to select the desired AUDIO language.  
• English  
• French  
• German  
• Italian  
• Spanish  
• Portuguese  
10  
 
SUBTITLE  
Press direction  
/
button to highlight the SUBITITLE and press the ENTER  
button, then press the direction  
language.  
/
button to select the desired SUBTITLE  
• English  
• French  
• German  
• Italian  
• Spanish  
• Portuguese  
2. SCREEN SETUP MENU  
In stop mode press SETUP button and highlight SCREEN setup then press ENTER  
button to confirm.  
To select the desired item by use the direction  
/
,
/
button.  
TV TYPE: 4:3 PS (Pan Scan)  
4:3 LB (Letter Box)  
16:9 (wide screen)  
SCREEN SAVER: ON  
OFF  
VIDEO OUTPUT: S-Video  
CVBS + YUV  
YUVP - SCAN  
BRIGHTNESS: NORMAL  
BRIGHT  
SOFT  
CONTRAST: -4  
-3  
-2  
-1  
0
+1  
+2  
+3  
+4  
3. AUDIO SETUP MENU  
In stop mode press SETUP button and highlight AUDIO setup then press ENTER  
button to confirm.  
To select the desired item by use the direction  
/
,
/
button.  
DIGITAL OUT:  
SPDIF/PCM  
SPDIF/RAW  
11  
 
4. CUSTOM SETUP  
In stop mode press SETUP button and highlight CUSTOM setup then press ENTER  
button to confirm. To select the desired item by use the direction  
/
,
/
button.  
ANGLE MARK: ON  
OFF  
“ANGLE MARK”, there are “ON” and “OFF” two choice for this item. If in the “ON”  
mode, when play a disc which the content is multi-angle shot, you may press the  
ANGLE button on the remote control to enjoy the scene in different angles.  
DEFAULT: READ  
This setting is used to return the unit back to the factory default settings. Select  
DEFAULT, then press ENTER and when the menu switches to “READ” press ENTER  
again. To exit without making the changes use the button to back out of the menu.  
DVD Menu Play  
This function is only available when playing a DVD movie and is used to access Casting  
Information, Production History, Special Features.  
1. When a DVD is playing, press the DVD MENU button on the remote control to enter  
the DVD Root Menu.  
2. Use the Direction button (  
/
/
/
) to select the required item from the list presented.  
3. Press ENTER to confirm and start the selection.  
Other Functions  
Audio  
This funciton is applicable for DVD only.  
-
Pressing AUDIO button will change the Audio channel between those available on the  
DVD.  
REW / F.F. (  
/
)
This function is applicable for DVD and CD audio but with different effects. The FAST  
FORWARD key and FAST BACKWARD key are used to achieve fast play function.  
-
For DVD, there are 5 different levels of speed (2x, 4x, 8x, 16x, 32x). Every successive  
key press will increment the speed of quick play.  
-
For CD audio, the FORWARD/BACKWARD will perform quick rolling on the music  
output.  
Note : Press PLAY button at any stage will resume to normal speed.  
PREV. / NEXT (  
/
)
During playback, press one of the PREV. / NEXT buttons (PREVIOUS button and NEXT  
button)  
-
When the PREV. button is pressed once, the pickup returns to the beginning of the  
PREVIOUS playing chapter or track.  
-
When the NEXT button is pressed once, the pickup will go to the beginning of next  
chapter or track.  
P. SCAN (PROGRESSIVE SCAN)  
Press this button to enter to the P-SCAN mode. Press this button again switch back to  
normal interface mode.  
Note : To select P-SCAN mode, the P-SCAN output must be connect to a P-SCAN TV,  
otherwise the picture will be unstable and picture will disappear.  
12  
 
Slow  
The Slow Forward is applicable for DVD. There are 5 steps of slow motion speed, 1/2,  
1/4, 1/8, 1/16, 1/32. Successive key presses will decrement the playback speed.  
Note: Press PLAY button to switch back to normal playback speed.  
Repeat Mode  
This function is available for DVD and CD audio but with different effects.  
-
For DVD disc playback, the user can choose to repeat the current chapter, current  
title or disc. Each subsequent key press of the REPEAT key can change between  
these three options.  
-
For CD, user can choose to repeat the current track or the whole disc (Repeat All).  
Each subsequent key press of the REPEAT key can change between these two  
options.  
Repeat A – B  
The user can specify the repeating interval by marking the starting point and the end  
point.  
1. Press the REPEAT A-B button to mark the starting point (Playback will continue).  
2. Press the REPEAT A-B button to mark the end point (The marked part will be  
repeated automatically).  
Note : Pressing the REPEAT A-B button during repetition will disable the Repeat mode.  
Subtitle  
This function is only applicable for DVD disc. It can change the subtitle language shown  
on the screen.  
Note : The number of subtitles available depends on the information recorded on the  
DVD disc itself.  
Angle  
Some discs may have multiple viewing angles during production. Use the ANGLE button  
to select the viewing angle shown on the screen.  
Note : The number of Angle of View depends on the information recorded on the DVD disc.  
Search  
The user can access a specific location or a specific track by keying in the target time or  
the track number.  
1. Press the SEARCH button to enter the Search Mode.  
2. Use the Direction buttons to enter the desired “Title”, or “Chapter” data then press  
the ENTER button to jump to the required location.  
3. Press the SEARCH button twice and enter the required time using the NUMERIC  
buttons IN ORDER. (To enter 1 hour, 25 mins and 45 seconds enter the numbers as  
1, 25, 45.) then press ENTER to jump.  
- Pressing the SEARCH button ONCE  
- Pressing the SEARCH button TWICE  
X / X  
X / XX  
X / X  
XX : XX : XX  
Current title  
Total title  
Total chapters  
Current chapter  
Current title  
Hour  
Second  
Minute  
Total title  
• For CD Mode  
XX : XX : XX  
Hour  
Minute Second  
13  
 
Display  
Pressing this button will show the time and status information on the screen. Pressing a  
second time will present addtitional information on the current settings. Press third time  
to cancel.  
Resume Play  
This function is in playback mode. When the STOP button is pressed once, the player  
will enter the Resume Play mode. At this time, if the PLAY button is pressed, the player  
will resume playback at the location where the STOP button was pressed. If the STOP  
button is pressed a second time, resume mode cancels and the DVD stops completely.  
Zoom  
This function will enlarge or reduce a still picture or a moving picture by pressing the  
ZOOM button to select one of the 2 levels of zooming (2x and 4x).  
NOTE: Use the Direction button (  
) to navigate within the image.  
Program Mode  
This function is to allow programming of a track/chapter/title playback sequence  
according to your preference.  
FOR DVD  
FOR CD  
1. Press the PROGRAM button. the Program Sequence table will be shown on the screen.  
2. Enter the desired track number according to your preference using the Number keys  
(0-9).  
3. When the programming is completed, press PLAY button on the remote control to start  
program play.  
14  
 
Picture CD  
Load a picture CD into the tray. This player will only identify the disk and display files in  
the jpg format. If the disc type can be identified, the player will start showing the pictures  
one by one (Slide Show Mode).  
Operations:  
During Slide Show Mode:  
Press the STOP button to shift to the Digest Mode in which 1 to 20 pictures will be  
shown on the screen each time.  
Note: Some disc may not shift to digest mode, it depends on the disc format.  
Press the PAUSE button to freeze the screen, so that the current picture can be held  
for a long time. To resume the slide show mode, press PLAY button.  
Press the NEXT button on the remote control to skip the next picture.  
Press the PREVIOUS button on the remote control to return previous picture.  
15  
 
TROUBLE SHOOTING  
Check the following guide for the possible cause of a problem before contacting service.  
Correction  
Cause  
Symptom  
No Power  
• Plug the power cord into the wall  
outlet and unit securely.  
• The power cord is disconnected.  
Insert a disc. (Check that the DVD or au-  
dio CD indicator in the DVD display is lit.)  
Select the appropriate video input mode  
on the TV so the picture from the DVD  
player appears on the TV screen.  
• No disc is inserted.  
The power is on, but DVD  
player does not work  
No Picture  
• The TV is not set to receive DVD  
signal output.  
• Connect the video cable into the  
jacks securely.  
• The video cable is not connected  
securely.  
• Turn on the TV.  
The connected TV power is turned off.  
• Select the correct input mode of the  
audio receiver so you can listen to the  
sound from the DVD player.  
• Connect the audio cable into the  
jacks securely.  
No Sound  
• The equipment connected with the  
audio cable is not set to receive  
DVD signal output.  
• The audio cable is not connected  
securely.  
• Turn on the equipment connected with  
the audio cable.  
The power of the equipment connected  
with the audio cable is turned off.  
Set the Digital audio Output to the correct  
position, then turn on the DVD player  
again by pressing the POWER button.  
• The Digital Audio Output is set to  
the wrong position.  
• Clean the disc.  
• The disc is dirty.  
The playback picture  
is poor  
• Insert a disc  
• No disc is inserted.  
The DVD player does  
not start playback  
Insert a playable disc. (Check the disc  
type, color system and Regional code.)  
Place the disc with the playback side down.  
• An unplayable disc is inserted.  
• The disc is placed upside down.  
• The disc is not placed with the  
guide.  
• Place the disc on the disc tray cor-  
rectly inside the guide.  
• Clean the disc.  
• The disc is dirty.  
• Press the SET UP button to turn off  
the menu screen.  
• A menu is on the TV screen.  
• Point the remote control at the remote  
sensor of the DVD player.  
• Operate the remote control within  
about 23ft (7m).  
The remote control is not pointed at  
the remote sensor of the DVD player.  
The Remote Control  
does not work  
properly  
• The remote control is too far from  
the DVD player.  
• Remove the obstacle.  
There is an obstacle in the path of the  
remote control and the DVD player.  
• Replace the batteries with new ones.  
• The batteries in the remote  
control are exhausted.  
16  
 
SPECIFICATION  
GENERAL  
Power source  
AC120V ~ 60Hz  
10W  
Power consumption  
Weight  
780 gm / 1.65 lbs  
244 x 173 x 37 mm / 9.6 x 6.8 x 1.5 inches  
Temperature: 5°C to 35°C  
Horizontal  
External dimensions (LxWxH)  
Operating conditions  
Operation status  
Operating humidity  
5% to 90%  
CD/DVD  
Laser  
Semiconductor laser, wavelength 650nm  
Signal system  
NTSC  
Frequency response (audio)  
Signal to noise ratio (audio)  
Dynamic range (audio)  
Harmonic distortion (audio)  
4Hz to 20 KHz  
More than 90dB (1KHz, NOP, 20KHz LPF/A-Filter)  
More than 95dB  
0.2% (1KHz)  
VIDEO  
Video output  
S-Video output  
1.0V (p-p), 75 ohm, negative sync., RCA jack  
(Y) 1.0V (p-p), negative sync., Mini DIN 4-pin x 1  
(C) 0.3V (p-p), 75 ohm  
Component video (Y, Pb/Cb, Pr/Cr)  
(Y) 0.7V (p-p), negative sync. RCA jack  
(Pb/Cb) 0.7V (p-p), 75 ohm  
(Pr/Cr) 0.7V (p-p), 75 ohm  
* Design and specification are subject to change without notice.  
17  
 
TM & © MGA Entertainment, Inc.  
All Right Reserved. Used under license by  
The Singing Machine Co., Inc.  
The Singing Machine Company, Inc.  
657-0707-ENG01  
PRINTED IN CHINA  
6601 Lyons Road, Bldg. A7,Coconut Creek, FL33073-9902, USA.  
TEL:(954) 596-1000  
FAX:(954) 596-2000  
 

Kuppersbusch USA Ventilation Hood Kitchen Hoods User Manual
Lenovo Computer Monitor LXH GJ769F4 User Manual
Lexmark Printer 24T7401 User Manual
LG Electronics Computer Monitor 29UM65 P User Manual
Life Fitness Treadmill 90T XXXX 02 User Manual
Lincoln Electric Welder SVM169 A User Manual
Linksys Switch EFAH05W User Manual
LST Smoke Alarm 5351E User Manual
Maxon Telecom Wheelchair WL7 User Manual
Midland Radio Two Way Radio NAUTICO 3 User Manual